English

6-4. Network Settings

Click [Network] tab to set network information for the eClient.

NOTE

•All settings shown here are previously adjusted on the “WBT Setup Wizard”.

•Please set the properties depending on the eClient connection settings.

[Use PPP connection or another network adapter]

...................................Click to use a modem connection to the WTS.

(531L/531LT-GR only)

To connect to the WTS with a LAN network, set the following. [Obtain an IP address from a DHCP server]

...................................

This allows the user to receive IP information from a

 

DHCP service automatically. The DHCP service of a

 

server must be in operation to receive the information.

[Specify an IP address.] .......

If not using a DHCP service, please select this and

 

enter the information shown below.

[IP address] .........................

Type the eClient IP address.

[Subnet Mask].....................

Type the subnet mask.

[Gateway] ...........................

Type the Gateway IP address.

[Terminal Name] ................

Type a name to recognize this unit from others on the

 

network (only in use of the RDP protocol).

70 6. USING THE TERMINAL PROPERTIES