English
eClient Settings
The eClient’s default setting is to enable DHCP Options. There is no need for extra settings. After initial setup, confirm the following:
•[Use PPP connection or another network adapter]in the [Network] tab of “Terminal Properties” is selected.
•Press “DHCP Option” on “Network” tab in the “Terminal Properties”. “DHCP Options” is displayed.
[Enable DHCP Option] is selected, and code numbers assigned for the DHCP options.
After completing the above, the eClient will automatically receive information such as an IP address from the DHCP Server every time the unit is turned on.
NOTE
•If the DHCP Option is used to setup the eClient for the first time, “Terminal Connection Manager” will appear because the unit automatically receives information from the DHCP Server. (“WBT Setup Wizard will not be displayed.)
•If the DHCP Option is set once and needs to be canceled, please change the key of the DHCP Server. Even if changing the DHCP Option in the eClient, the DHCP Server will overwrite the option next time the unit is restarted, and the changes in the eClient will not be effective.
7. PRACTICAL SETUP 91