English

17. The last page of the “WBT Setup Wizard” is displayed.

Click [Finish] in the last page to display a “Terminal Settings change” dialog box. (This dialog box is displayed only when there are changes in the settings.)

Click [Yes] to restart the eClient to activate the changes.

·Click [No] to finish the “WBT Setup Wizard” and display “Terminal Connection Manager” on the screen. The setting is not activated until the eClient is restarted.

This completes the eClient settings.

The “Terminal Connection Manager” dialog box will be displayed after restarting.

NOTE

•When you are connecting to the WTS with a LAN card, another installation for a LAN card connection must be completed. Please follow the next page.

•When you are connecting to the WTS with a modem, another installation for a modem connection (a dial-up connection) must be completed. Please follow the “3-2. Dial-up Connection”, page 27.

26 3. SETTING UP THE eClient