English

2-2. Connecting the eClient

NOTE

•Before connecting the eClient, confirm the following:

•The eClient is turned off.

•The WTS is turned on.

•Connect the peripherals to the appropriate connectors of the unit.

1. In case of connecting the WTS through LAN:

Connect the eClient to the network with an ethernet cable.

In case of a dial-up or dial-in connection (531L/531LT-GR only): Connect the eClient to a modem or a modem card.

Modem

Card

Printer

Power Cord

 

Network

Keyboard

Mouse

2. Plug a keyboard and a mouse into the eClient. If using other devices, please connect them to the appropriate connectors.

If using a touch panel, a mouse should not be connected (531LT-GR only).

2. CONNECTING THE eClient 11