English
Modifying the settings
This enables to delete printer settings when a printer is connected to the LPT1 port.
1.
2.
Select LPT1 and click [Properties...].
“Printer Properties” dialog box is displayed.
Change the settings as needed.
[Friendly Name].................. | Changes the printer's name. (If you are naming the |
| printer, the name combination must be 31 character or |
| less.) |
•When your printer is listed
[Manufactures] / [Printers]
...................................Select the manufacturer and model of your printer.
•When your printer is not listed
[User Defined]..................... | Click the check box. |
[Model Name] .................... | Type the model and manufacturer of your printer. |
[Make this the default printer]
...................................Sets/cancels setting the printer as a default. (The
eClient corresponds to only LPT1 port, and only one printer at a time can be installed. The installed printer will be always the default printer.)
Click [OK] to return to the “Terminal Properties” dialog box.
Click [OK] in the “Terminal Properties” dialog box to save the settings and close the “Terminal Properties” dialog box.
6. USING THE TERMINAL PROPERTIES 75