Elation Professional 250 Pro - page 26

Design Spot 250 Pro™
©Elation Professional® 26 Design Spot 250 Pro™
8.2.3. Software version
This function will display the current operating software version of the fixture.
• Select “Software Version” in the system menu.
• Press enter to confirm.
• The LCD will read “V-X.X”, “X.X” represents the version number, e.g. “V-1.0”,
“V-2.6”.
• Use the UP and DOWN buttons to toggle through the software version of
different IC’s.
• Press the Mode/Esc-button to return to the main menu.
8.3 Lamp Control:
8.3.1 Lamp On or Off
This function allows manual control of the lamp power via the on-board system menu.
• Select “ON” if you wish to strike the lamp or “OFF” to switch it off.
• Press “ENTER” to confirm.
• Press the Mode/Esc-button to return to the main menu.
8.3.2 Automatic La-On
When in the “ON” position, this function will automatically turn the lamp on when power
is applied to the fixture
8.3.3 Lamp On Via DMX
When engaged, this function will allow the lamp to be switched “on” via a DMX controller.
Select “ON” to enable this function or “OFF” to disable it.
8.3.4 Lamp Off Via DMX
When engaged, this function will allow the lamp to be switched “off” via a DMX controller.
Select “ON” to enable this function or “OFF” to disable it.
8.3.5 Lamp Off No DMX
When engaged, this function will automatically switch the lamp “off” when the fixture
loses a DMX signal. The function can be set with a delay time of 1 ~ 19 minutes. To
disable this function select “OFF” in the system menu. To enable this function select