Design Spot 250 Pro™
©Elation Professional® 29 Design Spot 250 Pro™
Movement Speed – This function changes the speed function of the Pan and Tilt
motors. There are 3 different mode variations;
Speed 1 (Default): Slower than the original Design Spot 250 for smoother, more
precise movements.
Speed 2: Pan and Tilt speeds are identical to the first generation Design Spot
250.
Speed 3: Includes a faster Pan speed. Pan speed is 0.5 seconds faster than
original Design Spot 250. Tilt speed will be the same as speed 2.
Microphone Sensitivity – This function makes the internal microphone more or
less sensitive to sound. This function only works in conjunction with the sound active
modes. The default setting is 70% and setting range from 0% to 99%.
8.4.2 Service Settings – These adjustments and settings should only performed by a
technician familiar with the functionality of professional lighting fixtures. Incorrect setting
of these functions may result reduced performance or damage to the fixture.
Service Password: The correct password must be entered before attempting wheel
calibration, changing fan voltage, or changing the gobo speed.
Fan Voltage: This function will change the fan voltage from either “Low” or “High.”
Low will send normal voltage to the fan, for normal operation. High will send slightly
higher voltage to fans that allows the fans to operate at higher than normal speeds.
This setting should only be used in extreme cases of higher than normal
temperatures. Using the fans in “HIGH” mode will decrease fan life over time. Low is
the default setting.
Gobo Speed: This function will change the speed at which the gobo wheel moves.
There are two different settings, “Quick” and “Slow.” Slow will move the gobo wheel
at a speed that matches the first generation Design Spot 250. The “Quick” setting
will advance the wheel at a new, faster rate than the original Design Spot 250.