Design Spot 250 Pro™
©Elation Professional® 39 Design Spot 250 Pro™
and toggle to
Step 2 – Editing Programs.
The control will store a maximum of 10 programs. A program can store one or a maximum of
64 scenes. Keep in mind that a scene can only be access when it is stored inside one of the
10 available programs. Follow the procedure below to build an internal program:
• Access the main menu and toggle to “Edit Programs” which is menu function 8.
• Then tap the “ENTER” button and toggle to “Program 1” menu function 8-2-1.
• When you get to the “Program 1” function tap the “ENTER” button. The screen will
then change to Edit Steps 01, this will be menu function 8-2-1-1. Use the “UP” and
“DOWN” buttons to toggle through the scenes created in “Step 1.” Press the
“ENTER” button to add a scene to the program. Tapping the “Enter” button will
automatically lock the selected scene into the programs’ memory. Repeat the
process until all the desired scenes have been added to the program. Each program
can store a maximum of 64 scenes.
• To test the program access “Program Test” in the “Program Edit” menu function.
Step 3 – Playing a Program
To initiate a program follow the procedure below:
• Access the main menu and use the “Up” and “Down” to toggle to “Function Mode”
and tap the “Enter” button.
• In the next screen select “Auto Program” and tap the “Enter” button.
• There are now two selections, “Master” and “Alone.” Select “Master” when running
multiple fixtures in a master/slave configuration. See section 10.2 “Master/ Slave
Operation” on page 36 for proper set-up instructions. Select “Alone” when running a
single fixture or when multiple fixtures in stand-alone mode. See section 10.1
“Stand-Alone Operation” on page 35 for proper set-up instructions.