Power Wash 250™
3.10.2 Lamp On automatically (LAAU)
LAAU
This function automatically strikes lamp when main power is turned on. If you would prefer to strike the lamp through a DMX controller you must turn this function off. To toggle between Off and ON use the Up and Down buttons. Use the Enter button to confirm your setting.
Please note: ON is the default setting for this function
3.10.3 Lamp Off via DMX (DLOF)
DLOF
This function allows the lamp to be switched off through a DMX controller. To enable this function use the Up and Down buttons to toggle between ON and Off. Turn this function on to allow DMX switching. Press Enter to confirm or Mode to cancel and return to the menu.
3.10.4 DMX Readout (DMXI)
DMXI
This function will use the LED to readout the DMX values of each channel received by the fixture. Use the Up and Down buttons to select desired channel and press Enter to read its value.
Function |
| Value | |
PAN | 0 | - | 255 |
TILT | 0 | - | 255 |
COLO | 0 | - | 255 |
SHUT | 0 | - | 255 |
DIMR | 0 | - | 255 |
MOVE | 0 | - | 255 |
SPEC | 0 | - | 255 |
3.10.5 Display (DISP)
DISP
Remark
Pan Position
Tilt Position
Color wheel (fixed colors)
Shutter / Strobe function
Dimmer
Movements
Lamp Off, Reset, ...
Use this function to choose between different display indications. Use the Up and Down buttons to toggle between the two different display modes.
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com | - | Page 21 |
