Power Wash 250™
6. Service and Maintenance
6.1 Lamp Change
To ensure a smooth operation, please follow these instructions carefully.
Safety Guidelines
•Always disconnect main power prior to performing any service procedure!
•Caution: Always replace with the exact same type lamp, unless otherwise specified by an authorized Elation® service technician. Replacing with anything other than the specified part can damage your fixture and will void your manufactures warranty.
•Warning: If you continue to blow lamps, STOP using the fixture. Contact customer support for further instructions, you may have to return the unit for service. Continuing to use the fixture may cause serious damage.
•Always allow ample time for the fixture to cool (approximately 20 minutes) before attempting a lamp change.
•Never handle lamp with your bare hands as the oils from your skin may damage the lamp
•Be sure to review all lamp handling and safety procedures on page 6 before attempting any lamp service.
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com | - | Page 29 |
