Power Wash 250™
3.9Fuse Requirements
The POWER WASH 250B™ electronic system is protected by a 5x20 mm external fuse. 115V / T 6.3A (US model) or 230V / T 3.15A (EU model).
The fuse requirements are clearly printed on the side of the fixture.
WARNING:
•Always disconnect main power before changing a fuse!
•Always replace with the exact same type fuse unless otherwise specified by an authorized Elation® service technician. Replacing with anything other than the specified part can severely damage your fixture and will void your manufactures warranty.
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com | - | Page 15 |
