Electro-Voice NetMax N8000 owner manual Rear Panel, AUDIO SLOTs, Network Module Slot

Control Elements and Connections

2.2 Rear Panel

							AUDIO SLOT 3	AUDIO SLOT 1
MODEL: N8000		BURNSVILLE, MN, U.S.A.
MADE IN GERMANY C	US
100-240 V~ 50-60 Hz/90 W				N378
SERIAL: 170323 03150 10001
		CONTROL PORT			REMOTE	RS-232
	INPUTS	GND 1 2	3	4 10V REF
	0-10V
						PORT 1	ETHERNET
				STATUS
	RELAY	2	3	4 5V/200mA		PORT 2
	OUTPUTS				CAN BUS		AUDIO SLOT 4	AUDIO SLOT 2

There are all connections for analog and digital audio signals, control interfaces and the power supply at the rear panel of the N8000.

AUDIO SLOTs

The AUDIO SLOTs 1 - 4 are module slots for the installation of NetMax audio modules. There are both analog and digital input and output modules available. Also, a module for microphone input sensitivity is optionally available. Each slot can accept any module so you can equip those inputs and outputs which you need for your specific application. The N8000 detects the type of the module automatically and offers the corresponding configuration possibilities.

ATTENTION:

The N8000 has to be switched off if you want to change or install a module. You will find detailed instructions in the data sheet of the corresponding module.

Network Module Slot

This slot is provided for the installation of a network module, e.g. CM-1 CobraNet™ module. There are all 64 audio channels - 32 inputs and 32 outputs - internally available at this slot. The CM-1 allows up to 32 digital audio input signals and 32 digital audio output signals to be transmitted via a CobraNet™ network simultaneously. Thus, several N8000

NetMax system controllers can be connected to create a large, distributed audio system. The

12NetMax N8000 System Controller

Owner’s manual