Electro-Voice NetMax N8000 owner manual Interface description, Ethernet Interface, Preparations

Models: NetMax N8000

1 48
Download 48 pages 31.71 Kb
Page 17
Image 17
3.3 Interface description

Preparations

3.3 Interface description

Ethernet Interface

By connecting the N8000 system controller via the Ethernet interface, the communication between the N8000 and one or several PC is possible. This allows the configuration of N8000 via IRIS-Net software. Furthermore, the whole connected system (consisting of N8000s and EV Precision Series Remote Control Amplifiers) can be operated and monitored. By using appropriate network

hardware it is even possible to operate the N8000 via a wireless network (WLAN). The Ethernet interface on the rear of N8000 is a RJ-45 connector (8P8C). Both 10Base-T and 100Base-TX Ethernet standards are supported. The connections of the Ethernet interfaces can be seen in the following figure and table.

Pin Assignment of Ethernet jack

Pin

Name

Description

Pair

Colour

T568A

T568B

 

 

 

 

1

Tx+

Transmit+

2

Green striped

Orange striped

 

 

 

 

 

2

Tx-

Transmit-

Green

Orange

 

 

 

 

 

 

 

3

Rx+

Receive+

3

Orange striped

Green striped

 

 

 

 

 

6

Rx-

Receive-

Orange

Green

 

 

 

 

 

 

 

The pin assignment of the Ethernet connector is shown in the following figure. The connector is viewed from the contact side.

Pin Assignment of Ethernet plug

NetMax N8000 System Controller

17

Owner’s manual

 

Page 17
Image 17
Electro-Voice NetMax N8000 owner manual Interface description, Ethernet Interface, Preparations