Electrolux 137382100 A (1106) Reversing door and hardware, Removing Hinge from Front Panel

20Reversing Door

Reversing door and hardware

C)Removing Hinge from Front Panel

1With the hinge in open position, remove 2 short, course-thread, panhead screws on hinge plate.

2Remove 3 short, fine-thread, counter-sunk screws in hinge side.

2Rotate striker and move to opposite opening. Attach with 2 short, course-thread, panhead screws.

3 Install plastic hole plugs.

E) Reattaching Hinge to Front Panel

1 Rotate the hinge and move it to the opposite opening. Use the side locating pins to align the hinge and install 1 short, fine-thread, counter- sunk screw in the center hole of hinge side.

D) Reversing Hardware on Front Panel

1 Remove 2 short, course-thread, panhead screws from striker and 2 plastic hole plugs.

2 Install the other 2 short, fine-thread, counter- sunk screws in the upper and lower holes of hinge side.

3 Install 2 short, course-thread, panhead screws through hinge plate.