Electrolux 318205134 Setting Self-Clean Cycle, Setting self-clean, Setting delayed self-clean

Models: 318205134

1 32
Download 32 pages 26.15 Kb
Page 23
Image 23
Setting Self-Clean Cycle 23

 

Setting Self-Clean Cycle 23

 

 

 

 

 

Setting self-clean

 

 

Setting delayed self-clean

 

 

 

 

 

A self-cleaning oven cleans itself with high temperatures (well above cooking temperatures) which eliminate soil completely or reduce it to a fine powdered ash you can whisk away with damp cloth. If you are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour.

1.Remove the oven racks and the racks supports.

2.Be sure the clock is set with the correct time of day and the oven door is closed.

3.Press OVEN.

4.Press LITE CLEAN for a 2 hours self-clean, MED CLEAN for 3 hours, or press HEAVY CLEAN for 4 hours cleaning cycle.

5.Press START. The “DOOR ” icon will flash.

6.As soon as the control is set, the motor driven oven door lock will begin to close automatically.

Once the door has been locked the “DOOR ” indicator light will stop flashing and remain on.

Note: Allow about 15 seconds for the oven door lock to close.

When the Self-Clean Cycle is Completed

1.The time of day and “DOOR ” will remain ON.

2.The display will show an “Hot” message while the oven is still too hot to open door.

3.Once the oven has cooled down for 1 HOUR, and the “DOOR ” icon is no longer displayed, the oven door can then be opened.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self- cleaning cycle due to excessive smoke:

1.Press CANCEL.

2.Once the oven has cooled down for approximately 1 HOUR and the “DOOR ” icon is no longer displayed, the oven door can then be opened.

During the self-cleaning cycle, the outside of the oven can become very hot to the touch. DO NOT leave small children unattended near the appliance.

1.Remove the oven racks and the racks supports.

2.Be sure the clock is set with the correct time of day and the oven door is closed.

3.Press OVEN.

4.Press LITE CLEAN for a 2 hours self-clean, MED CLEAN for 3 hours, or press HEAVY CLEAN for 4 hours cleaning cycle.

5.Press START. The “DOOR ” icon will flash.

6.As soon as the control is set, the motor driven oven door lock will begin to close automatically.

Once the door has been locked the “DOOR ” indicator light will stop flashing and remain on.

7.Press END TIME.

8.Enter time of day needed for the end of the cycle (example for “6:00”; 6 0 0).

9.Press START.

Note: Allow about 15 seconds for the oven door lock to close.

When the Self-Clean Cycle is Completed

1.The time of day and “DOOR ” will remain ON.

2.The display will show an “Hot” message while the oven is still too hot to open door.

3.Once the oven has cooled down for 1 HOUR, and the “DOOR ” icon is no longer displayed, the oven door can then be opened.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self- cleaning cycle due to excessive smoke:

1.Press CANCEL.

2.Once the oven has cooled down for approximately 1 HOUR and the “DOOR ” icon is no longer displayed, the oven door can then be opened.

DO NOT force the oven door open. This can damage the automatic door locking system. Use care when opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape. The oven may still be VERY HOT.

Page 23
Image 23
Electrolux 318205134 manual Setting Self-Clean Cycle, Setting self-clean, Setting delayed self-clean, Press END TIME