20Setting Your Preferences
Setting the clock - Time of day
The clock may be set for 12 or 24 hour time of day operation (see advanced settings section). The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the display will show “CLO 12:00”. The clock must be set before the oven can be used. When power to the unit has been interrupted, “12:00” appears and flashes in the display. To set the Clock in this case, skip step 1 in the example below and follow steps 2 and 3.
To set the clock (example for 1:30)
1.Press USER PREF until you get to the CLO 12:00 menu page.
2.Press 1 3 0 pads to set the time of day to 1:30. The pads HI or LO can also be pressed to raise or lower the actual time displayed.
3.Press START to accept the changes and go back to user preferences menu display.
4.Press CANCEL when finished to get back to the standard oven display.
Setting the clock - On or Off
The oven control can be programmed to display the time of day or not. The oven has been preset at the factory to display the time of day.
Changing clock display between ON and OFF
1.Press USER PREF until you get to the CLO on menu page.
2.Press LO or HI to toggle between displaying or hiding the clock.
3.Press START to accept the changes and go back to user preferences menu display.
4.Press CANCEL when finished to get back to the standard oven display.
Setting time of day display - 12 or 24 hours
The oven control can be programmed to display time of day in 12 hours or 24 hours mode. The oven has been preset at the factory to display in 12 hours mode.
Changing between 12 or 24 hour time of day display
1.Press USER PREF until you get to the CLO 12hr menu page.
2Press LO or HI to toggle the display of the clock in 12 or 24 hours.
3.Press START to accept the changes and go back to user preferences menu display.
4.Press CANCEL when finished to get back to the standard oven display.
5.Remember to set your clock after changing the time of day display mode.
Setting temperature display - Fahrenheit or Celsius
The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit
1.Press USER PREF until you get to the
2.Press LO or HI to toggle between the °C and °F display options.
3.Press START to accept the changes and go back to user preferences menu display.
4.Press CANCEL when finished to get back to the standard oven display.
