Appendix
Settings
Anynet+
•Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
•This function is not available if the HDMI cable does not support CEC.
•If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
BD Data Management
•In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback.
•Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported. We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster read/write speed.
•The Resume Play function may not work after you format the storage device.
•The total memory available to BD Data Management may differ, depending on the conditions.
Front Display
•You cannot change the brightness of the 
button and the VOL +, - button.
Speaker Settings
•When Speaker Selection is set to TV Speaker, audio is produced through the TV speakers.
•Running the Auto Sound Calibration function takes about 3 minutes.
•Make sure there is no disc in the product when you run the Auto Sound Calibration function.
•If the ASC microphone is disconnected during the Auto Sound Calibration setup, the setup will be canceled.
•When the Auto Sound Calibration function is activated, the DSP, Dolby Pro Logic ll and SFE Mode will not work.
•If the product is connected to external devices or other components (such as an iPod, AUX, D. IN), the Auto Sound Calibration Setup may not work properly.
HDMI audio
•When HDMI audio is output to the TV speakers, it is automatically
Audio Return Channel
•When Anynet+
•Using an HDMI cable not certified for ARC (Audio Return Channel) may cause a compatibility problem.
•The ARC function is only available if an
Digital Output
•Digital Output can be activated when Speaker Selection is set to TV Speaker.
56 English
