Settings
Upgrading Software
The Software Update menu allows you to upgrade the product’s software for performance improvements or additional services.
•Never turn the product off or back on manually during the update process.
1 . In the Home menu, select Settings, and then press the E button.
2 . Select Support, and then press the E button.
3 . Select Software Update, and then press the
Ebutton.
4 . Select one of the following methods:
•Online
•By USB
•By Disc
•By downloaded
•Standby Mode Upgrade
5 . Press the E button.
Directions for each method begin below.
NOTE
The upgrade is complete when the product turns off, and then turns on again by itself.
Samsung Electronics takes no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a Software Update.
If you want to cancel the upgrade while the upgrade software is downloading, press the E button.
Online
Your product must be connected to the Internet to use the Online function.
1 . Select Online, and then press the E button. The Connecting to Server message appears.
2 . If there is a download available, the Download
3 . When the download is complete, the Upgrade Query window appears with three choices: Update now, Update later or Don’t update.
36 English
4 . If you select Update now, the product upgrades the software, turns off, and then turns on automatically.
5 . If you do not make a selection in one minute or select Update later, the product stores the new upgrade software. You can upgrade the software later using the By downloaded function.
6 . If you select Don’t update, the product cancels the upgrade.
By USB
1 . Visit www.samsung.com.
2 . Click SUPPORT on the top right of the page.
3 . Enter the product's model number into the search field, and then click Find Product.
4 . Click Get downloads in the center of the page below the Downloads header.
5 . Click Firmware in the center of the page.
6 . Click the ZIP icon in the File column on the right side of the page.
7 . Click OK in the
8 . Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file.
9 . Copy the folder to a USB flash drive.
10 . Make sure no disc is inserted in the product, and then insert the USB flash drive into the USB port of the product.
11 . In the product’s menu, go to Settings > Support > Software Update.
12 . Select By USB.
NOTE
There should be no disc in the product when you upgrade the software using the USB Host jack.
When the Software Update is done, check the software details in the Software Update menu.
Do not turn off the product during the Software Update. It may cause the product to malfunction.
Software Updates using the USB Host jack must be performed with a USB flash memory stick only.
