Electrolux 318 203 890 (1001) manual Getting Started, Setting clock at power up, Oven light

Models: 318 203 890 (1001)

1 48
Download 48 pages 2.36 Kb
Page 14
Image 14

14Getting Started

Setting clock at power up

When the unit is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash with "12:00". The clock cannot be set when the oven is on. If an invalid time of day is entered, the control will triple beep to prompt you to re-enter a valid time of day.

To set the clock (example for 1:30):

+ -

1.Press 1 3 0 pads to set the time of day to 1:30. The pads hi or lo can also be pressed to raise or lower the actual time displayed.

2.Press STARTto accept the changes or CANCELto start with a time of 12:00.

temperature visual display

Your oven is equipped with a temperature visual display for each oven. When a cooking mode is set, the actual temperature will be shown in the display and will rise as the unit preheat. When the unit has reached its target temperature, a chime will sound to remind you to place the food in the oven. This feature will be active with some cooking modes; bake, convection bake and convection roast. The cooking modes which does not feature the temperature visual display will be noted in their descriptions.

NOTE: The lowest temperature that can be displayed is 100°F.

oven light

Your appliance includes “theater” style oven lighting feature that gradually lights both the upper and lower oven interiors to full brightness. The upper oven is equipped with 2 halogen lights and the lower oven is equipped with 1 incandescent light. The oven lights will turn on automatically when the oven door is opened. The oven light may be turned on when the door is closed by using the oven light pad located on the control panel. The oven light key will toggle the lights in both ovens at the same time at full intensity.

To toggle the Oven Lights ON and OFF:

1. Press OVEN LIGHT .

Page 14
Image 14
Electrolux 318 203 890 (1001) manual Getting Started, Setting clock at power up, Temperature visual display, Oven light