3.FITTING THE STABILITY BRACKET

It is recommended that if the appliance is to be installed with a flexible supply pipe a stability bracket (SK.4729.A) is fitted and is available from your supplier (see Important Safety Requirements, Page 33). These instructions should be read in conjunction with the leaflet packed with the stability bracket.

1.Place the appliance in its intended position and level appliance.

2.Mark off 250mm from the left hand side of the appliance as shown in dimension 'A', Fig 2a. This is the centre line of the fixing bracket.

3.Draw a line 100mm from the front edge of the levelling feet (see Fig 2a) and remove appliance from its position. Mark off dimension 'B' (see Fig 2a) back from this line on the centre line of the bracket to locate the front edge of the lower bracket. Fix lower bracket (with two fixing holes) to the floor then measure the height from floor level to engagement edge on back of appliance, dimension 'C' of Fig. 2b.

4.Assemble upper bracket to lower bracket so that underside of bracket is dimension 'C' +3mm above floor level. (see Fig. 2b).

Reposition appliance and check that top bracket engages into appliance back as shown in Fig. 2b.

487mm (B)

100mm (C)

(A)

250mm

Fig.2a

Fig.2b

4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less than R³/8. Connection is made to the Rc ½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE: ONLY LIQUID SEALANTS TO

BE USED WHEN INLET GAS PIPE IS FITTED TO RESET VALVE I.E.: DO NOT USE P.T.F.E. SEALANT TAPE.

Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig. 3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

36

Page 35 Page 37
Page 36
Image 36
Electrolux 5 0 G L installation instructions Fitting the Stability Bracket, Connecting to GAS
Page 35 Page 37

5 0 G L specifications

Electrolux 5.0 GL is a state-of-the-art appliance designed to enhance your cooking experience while ensuring high performance and energy efficiency. With its sleek and modern design, this product stands out in any kitchen, combining aesthetics with functionality.

One of the main features of the Electrolux 5.0 GL is its advanced cooking technology. Equipped with innovative induction cooking capabilities, it allows for precise temperature control, ensuring that your dishes are cooked to perfection. Induction cooking is known for its quick heat-up times, allowing you to save on cooking time and energy. This technology also offers safety features, as the cooktop remains cool to the touch, significantly reducing the risk of burns.

Another standout feature is the spacious 5.0 cubic foot capacity, which provides ample room for meal preparation. Whether you are cooking large family meals or entertaining guests, this appliance can accommodate various cookware sizes, giving you the flexibility to create multiple dishes simultaneously.

The Electrolux 5.0 GL also incorporates smart technology, enabling users to connect the appliance to their smartphones or tablets. This connectivity allows for remote monitoring and control, offering the convenience of managing cooking settings from a distance. With this feature, you can preheat the oven, adjust timers, or receive notifications once your dish is ready, making meal preparation more efficient.

Impressive energy efficiency is another characteristic of the Electrolux 5.0 GL. The appliance meets high energy standards, helping reduce energy consumption and lower utility bills. This not only benefits your wallet but also contributes to a more sustainable environment.

Additionally, the appliance boasts easy-to-clean surfaces and a self-cleaning option, making maintenance a breeze. The interior is designed with premium materials that resist stains and odors, ensuring that your cooking space remains fresh and hygienic.

In summary, Electrolux 5.0 GL combines cutting-edge technology, generous capacity, smart features, and energy efficiency. Its induction cooking capabilities, connectivity options, and easy maintenance make it a leading choice for modern kitchens. Whether you’re a seasoned chef or a home cook, this appliance is designed to elevate your culinary experience to new heights.
Top Page Image Contents