Electrolux B8871-4 manual What to do if …, The oven’s safety cut-out has, See “Safety fuse”

What to do if …

Problem	Possible cause	Remedy
The oven does not heat	The oven is not switched on	Switch the oven on
up	The clock is not set	Set the current time on the
		clock
	The required settings have	Check the settings
	not been set
	The oven’s safety cut-out has	See “Safety fuse”
	been tripped
	The fuse in the house’s elec-	Check fuse. If the fuses trip
	trical wiring (fuse box) has	repeatedly, please call an au-
	been tripped	thorised electrician
The oven lighting is not	The oven bulb is faulty	Change the oven bulb
operating
Pyroluxe is not working	The oven shelf supports have	Remove oven shelf support
(“C1” appears in the clock	not been removed
display)
The oven door is locked	Appliance is not connected	Connect appliance to the
	to the electricity; door lock is	electricity and wait at least
	activated	15 minutes until the door
		lock is automatically released
The oven does not heat	Demo mode is on	Keep Select	button
up. Time is lit		pressed for 2 seconds, then
		within 2 seconds press and
		hold buttons Select		and
		for 2 seconds
F1 appears in the display	Door is not closed properly	Close the door properly and
		start the pyroluxe again. If
		displayed again, please con-
		tact your local Service Force
		Centre
F2 appears in the display	The door cannot be opened	Switch off the appliance via
		the house fuse or the safety
		switch in the fuse box and
		switch it on again.
		If displayed again, please
		contact your local Service
		Force Centre

54