Lighting the appliance
C S G 5 5 2
Lighting the appliance
The system works by means of an electric spark system. Details about the plug are given on page 34.
For your safety
In the event of the burner flames being accidentally extinguished, turn off the burner control and do not attempt to
Hotplate
To light
1.Push in the control knob and turn it to the large flame symbol (highest setting), and press the ignition button immediately. When the burner has lit release the button.
Warning: If the ignition button is not pressed a build up of gas may cause the flame to spread.
Please note: If you have any trouble lighting a hotplate burner turn all the hotplate control knobs off and make sure the hotplate burner parts have been replaced correctly.
See page 27 for more information.
4