Electrolux 95390024300 O. Environmental information, P. Troubleshooting table, Design, Disposal

Models: 291 95390045300 24800600B00 249654 95390042300 290 251 262 95390044500 95390024400 95390024300 D250

1 14
Download 14 pages 30.48 Kb
Page 13
Image 13
O. Environmental information

must be made without using the blade. KICKBACK can occur when cutting is done with the risk sector of the blade; we recommend cutting with the rest of the blade. Take care that the cup supporting the blade just grazes the ground. This will prevent the blade from touching the ground.

￿N1. CAUTION! WE RECOMMEND THE USE OF ORIGINAL ACCESSORIES AND REPLACEMENTS; THESE CAN BE FOUND AT YOUR OFFICIAL DISTRIBUTOR'S. THE USE OF ACCESSORIES AND REPLACEMENTS THAT ARE NOT ORIGINAL INCREASES THE DANGER OF ACCIDENTS AND IN THIS CASE THE MANUFACTURER IS NOT LIABLE FOR ANY DAMAGES TO PERSONS OR PROPERTY.

O. Environmental information

This section contains information useful for maintaining the characteristics of eco-compatibility included in the origin design of the machine, and as regards proper use and disposal of oil and fuel.

Design

In the design stage, care was taken to develop an engine with reduced consumption and low emissions of noise and pollutant exhaust fumes.

Use of machine

The operations of filling the tank with the fuel mixture should be carried out in such a way as to avoid spilling fuel and contaminating the soil and environment.

Periods of prolonged disuse

Always empty the fuel tank with the same precautions used in filling it (O).

Disposal

Do not dispose inappropriately of the machine when it is no longer usable. Deliver it to an authorized organization for proper disposal in compliance with the regulations in force.

P. Troubleshooting table

 

The engine does not

The engine stutters

The machine starts

 

start

or loses power

but does not cut

 

 

 

properly

 

 

 

 

Make sure the STOP switch is on I.

 

 

 

 

 

 

Make sure that the fuel tank is at least 25% full.

 

 

 

 

 

Make sure the air filter is clean.

 

 

 

 

 

Remove the sparkplug, dry and clean it, then return

 

it to its place. If necessary, replace it.

 

 

 

 

 

 

 

 

Change the fuel filter. Contact your supplier.

 

 

 

 

 

 

Follow the correct procedure for assembly of the

 

 

cutting accessories.

 

 

 

 

 

 

 

 

 

Make sure the metal accessories are sharp, and

 

 

contact your supplier if necessary.

 

 

 

 

 

The engine continues to have problems: contact your authorized supplier

10 - ENGLISH

Page 13
Image 13
Electrolux 95390024300 O. Environmental information, P. Troubleshooting table, Design, Use of machine, Disposal, English