Electrolux EDB 872 manual Connection To Electricity Supply, Installation Instructions, Tape

Models: EDB 872

1 44
Download 44 pages 37.55 Kb
Page 38
Image 38
CONNECTION TO ELECTRICITY

INSTALLATION INSTRUCTIONS

CONNECTION TO ELECTRICITY

SUPPLY

WARNING: This appliance must be earthed, do not earth this appliance to the gas supply piping.

This appliance must be connected to a isolated

 

220V-240V a.c. 50Hz supply which

 

incorporates a 3 ampere fuse. If any other type

 

of plug is used it should incorporate a 5 ampere

 

fuse in either the plug or adapter or at the

 

distribution board. The appliance is supplied

 

with 2 metres (6.5 ft) of 5 ampere 3 core cable

 

fitted with a moulded plug. If this proves

 

insufficient to allow the appliance to be plugged

 

into the nearest supply socket, the supply cable

 

can be either extended by using a B.E.A.B.

 

approved 3-way sealed flex connector with

 

integral flex clamps.

 

DO NOT EXTEND THE CABLE USING

 

PLASTIC OR CERAMIC CONNECTION

 

TERMINAL BLOCKS AND/OR INSULATION

 

TAPE.

 

Should the supplied cable be required to be

 

threaded through small apertures in the

 

cabinets it can be removed from the mains

 

plug.

 

If the supplied moulded plug is cut off

 

dispose of it safely as it will be a shock

 

hazard if inserted into a 13 amp socket

 

elsewhere in the house.

 

To fit a 3 pin 13 amp plug to the end of the

 

appliance cable (Fig.9). Connect the wires as

 

follows:

 

BROWN to the live terminal.

 

BLUE to the neutral terminal.

Fig.9

GREEN / YELLOW to the earth terminal.

38

Page 38
Image 38
Electrolux EDB 872 manual Connection To Electricity Supply, Installation Instructions, Do Not Extend The Cable Using, Tape