Cleaning and care, Outside of the appliance

40 electrolux cleaning and care

Cleaning and care

Warning: For cleaning, the appli- ance must be switched off and cooled down.

Warning: For safety reasons, do not clean the appliance with steam jet or high-pressure cleaning equip- ment.

5.When the oven has cooled but is not cold, wipe off any remaining soiling with a soft damp sponge.

Important! Do not use oven sprays or abrasive cleaners. Do not use soap or other cleaning agents. Do- ing so can damage the catalytic sur- face.

Important: Do not use any abrasive cleaners, sharp scrapers or abra- sive items.

Over time the catalytic coating can discolour slightly. This does not af- fect its catalytic properties.

•Wipe the front of the appliance with a soft cloth and a solution of wash- ing-up liquid and warm water.

•With metal fronts use the cleaners that are commercially available.

Oven lighting

You can switch on the oven light to make cleaning easier.

Cleaning

The walls that have a catalytic coating are self-cleaning. They absorb splashes of fat while the oven is in use.

To support this self-cleaning process, we recommend heating the oven with- out any food at regular intervals.

1.Remove all slide-in items from the oven.

2.Wash the oven floor with warm water and washing up liquid, then dry it.

3.Set the oven temperature to 250 °C.

4.Switch the oven off after one hour.

Wash all slide-in units (shelf unit, baking tray, shelf support rails etc.) after each use and dry well. Soak briefly to make them easier to clean.