34electrolux
C - E. Temperature setting buttons
The temperature can be adjusted between +2°C and +8°C.
By pressing the button (C or E), the current temperature setting flashes on the indicator. It is possible to modify the setting temperature only with flashing indicator. To set a warmer temperature, press button (C). To set a colder temperature, press button (E). The indicator displays the newly selected temperature for a few seconds and then shows again the inside compartment temperature.
The newly selected temperature must be reached after 24 hours.
Attention!
During the stability period and when first starting the appliance the temperature displayed does not correspond to the setting temperature. During this time it is possible that the temperature displayed is lower than the setting temperature.
D. Temperature indicator During normal functioning the
indicator shows the temperature inside the fridge.
Attention!
A difference between the temperature displayed and the temperature setting is normal. Especially when:
•a new setting has recently been selected
•the door has been left open for a long time
•warm food has been placed in the compartment
F - Super cooling pilot light
G - Super cooling button
The maximum performance is
obtained by setting the supercooling function. It’s recommended when loading large quantities of food.
Press the supercooling button
(G).The relevant pilot light (F) switches on. The internal temperature goes
down to +2°C.
After about 6 hours the supercooling function switches off automatically.
Operation
Insert the plug in the power socket. Press the button ON/OFF (B). The fridge is switched on.
The fridge is
As soon as the appliance is switched on the temperature indicator
(D)shows the current temperature inside the fridge.
Fresh food refrigeration
To obtain the best performance:
•do not store warm food or evaporating liquids in the refrigerator;
•do cover or wrap the food, particularly if it has a strong flavour.
•Position food so that air can circulate freely round it.
