Electrolux MCC4060E operating instructions Using the Stop button, Setting the clock

Using the STOP button

Use the STOP button to:

1. Erase a mistake during programming.

2. Stop the oven temporarily during cooking.

3. Cancel a programme during cooking, press the STOP button twice.

Setting the clock

There are two setting modes: 12 hour clock and 24 hour clock.

Step 1 Step 2

x1x2

Example:

To set the 24 hour clock to 23:35.

1.Choose the 24 hour clock by pressing the CLOCK SETTING button twice.

x2

4.Set the minutes (35).

1.To set the 12 hour clock, press the CLOCK SETTING button once as in Step 1.

2.To set the 24 hour clock, press the CLOCK SETTING button twice as in Step 2.

2. Set the hours. Rotate the TIMER/	3. Change from hours to minutes
WEIGHT knob clockwise until the	by pressing the CLOCK
correct hour is displayed (23).	SETTING button once.

x1

5.Press the CLOCK SETTING button to start the clock.

Check the display.

x1

NOTES:

1.You can rotate the TIMER/WEIGHT knob clockwise or counterclockwise.

2.Press the STOP button if you make a mistake during programming.

3.If the oven is in cooking mode and you wish to know the time of day, touch the CLOCK SETTING button. As long as your finger is touching the button, the time of day will be displayed.

4.If the electrical power supply to your microwave oven is interrupted, plug in the oven again, then open and close the door. The display will show

“ENERGY SAVE MODE TO GO OUT OF ENERGY SAVE

MODE SET CLOCK”. This information will appear if you have already set the language with the LANGUAGE button. If this occurs during cooking, the programme will be erased. The time of day will also be erased.

5.When you want to reset the time of day, follow the above example again.

6.If you do not set the clock, press the STOP button

once. will appear on the display. When the

operation of the oven is finished, will reappear on the display instead of the time of day.

7.If you set the clock, energy save mode does not work.

7