8.CHECKING THE HOTPLATE

Lift the lid. Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Check each of the hotplate burners in turn by turning the hotplate tap to it's full on position and pressing the ignition button. As soon as the burners are lit the button can be released.

9.CHECKING LID CUT-OFF DEVICE

1.Lift the lid.

2.Turn on and ignite hotplate burner.

3.Close lid. There should be no gas supply to the hotplate and the burner will go out.

4.Turn off the hotplate tap

5.Lift the lid. The gas supply should now be restored to the hotplate when the tap is turned on.

10. CHECKING THE MAIN OVEN

1.Turn the oven thermostat knob to Mk 9 and press the ignition button. As soon as the burner is alight the button can be released.

2.There should now be a low gas rate to the burner, which is the F.S.D. by pass rate.

3.When the F.S.D. phial has heated up it opens the F.S.D. valve which allows the main gas supply to the oven burner.

4.After 1 minute check that the flame covers the full width of the burner and is stable.

5.Set the oven control to Mk 2, close the oven door and check that after about 10 minutes the flame size has reduced.

6.Turn off the control and check that the oven flames go out.

11. CHECKING THE SECOND OVEN

1.Turn the second oven thermostat control knob anticlockwise to Mk8 and press the ignition button. As soon as the burner is alight the button can be released.

2.When the oven burner lights up there should be a low gas rate at first to the oven burner which is the F.S.D. by-pass rate.

3.When the F.S.D. phial has heated up it opens the F.S.D. valve and the main gas stream flows to the burner.

4.After 1 minute check that the flame covers the full width of the burner and is stable.

5.Set the oven control to Mk. 2, close the oven door and check that after approx. 10 minutes the flame size has reduced.

6.Turn off the control knob and check that the oven flames go out.

GENERAL NOTE

Instruct the user on how to use the appliance and its ignition system.

Refer the user to the wording in the inside cover which gives advice on the safe operation of the appliance.

43

Page 43
Image 43
Electrolux SG 332 Checking the Hotplate, Checking LID CUT-OFF Device, Checking the Main Oven, Checking the Second Oven