ENGLISH
19
E6.2 Installation diagrams
The following installation diagrams give the machine overall dimensions and position of water and electrical connec-
tions, as well as the position of the surround elements such as walls and extractor hoods.
In particular, make sure to position the possible extractor hood at a distance of not less than 15.74’’ ( 400mm) from the
machine so as not to compromise machine operation.
Also, the equipment must be installed at a distance of not less than 1.96’’ ( 50 mm) from the wall so as not to affect cor-
rect ventilation of internal components.
Atmospheric plumbing circuit diagram,
dishwashers - 66” ( with boiler )
Atmospheric plumbing circuit diagram,
dishwashers - 66” ( without boiler )
LEGEND
A = Hot water inlet (related to boiler rise)
B = Hot water inlet 80-140F (26-60°C)
C = Hot water inlet min 194°F (90°C)
D = Cold water inlet
M2 = Rinse pump
M4 = Wash pump
M8 = Prewash pump
ABV = Air Break Valve
YV1 = Filling / Air-Gap filling solenoid valve (5.28 gal/min - 20 l/min)
YV5 = Wash tank drain solenoid valve
YV6 = Wash tank water filling solenoid valve (
5.28 gal/min - 20 l/min
)
YV9 = Prewash tank water filling solenoid valve (5.28 gal/min - 20 l/min)
YV11 = Prewash tank drain solenoid valve
IMPORTANT!
The extractor hood is installed to remove the steam emitted by the machine. The hood air delivery
must be calculated taking into account the machine model, the type of installation and the work envi-
ronment where installed. However, an air delivery of not greater than 300 m3/h - 177 cfm is recom-
mended.
The hood is represented in the diagrams with the symbol:
The wall is represented in the diagrams with the symbol: