34
Figure 23 Positioning of safety signs
H2 Decommissioning
When the machine is no longer to be used, make it
unusable by removing the feed wiring from the power
supply and the water connections.
H3 Instructions for use and maintenance
Risks mainly of a mechanical, thermal and electrical
nature are present in the machine.
Where possible the risks have been neutralized:
• directly, by means of adequate design solutions,
• or indirectly by using guards, protection and safety
devices.
Any anomalous situations are signalled on the control
panel display.
During maintenance several risks remain, as these could
not be eliminated and which must be neutralized through
specific behaviour and precautions.
Do not carry out any control, cleaning, repair or mainte-
nance operations on moving parts.
Workers must be informed of the prohibition by means of
clearly visible signs.
To guarantee machine efficiency and correct operation,
periodical maintenance must be carried out according to
the instructions given in this manual.
In particular, make sure to periodically check correct
operation of all the safety devices and the insulation of
electrical cables, which must be replaced if damaged.
H4 Improper use
Improper use is any use differing from that specified in
this manual. During machine operation, other types of
work or activities considered improper and that in gen-
eral can involve risks for the safety of operators and
damage to the system are not allowed.
Improper use includes:
• failure to disconnect the power supply with the main
switch in “O” off position before carrying out adjust-
ment, cleaning, resetting and maintenance operations;
CAUTION
THIS DISHWASHER HAS MORE THAN ONE POWER-SUPPLY
CONNECTION POINT. DISCONNECT ALL POWER SUPPLIES
BEFORE SERVICING.
Doc.No.: 5956.613.00
CAUTION
THIS DISHWASHER HAS MORE THAN ONE POWER-SUPPLY
CONNECTION POINT. DISCONNECT ALL POWER SUPPLIES
BEFORE SERVICING.
Doc.No.: 5956.613.00
ref. Bref. Aref. A
MINIMUM WASH TEMPERATURE 160°F (71°C)
MINIMUM PUMPED RINSE TEMPERATURE 180°F (82°C)
MINIMUM SANITIZING RINSE TEMPERATURE 180 °F (82 °C)
MAX. CONVEYOR SPEED 5.48 FT./MIN (1.67 M/MIN)
Doc.No.: 5956.582.00
WARNING
THERE ARE MOVING PARTS.
THERE IS THE POSSIBILITY OF SPRAYING
AND SPLASHING OF HOT WATER.
Doc.No.: 5956.582.00
IMPORTANT!
Machine maintenance operations must
only be carried out by specialized Tech-
nicians provided with all necessary per-
sonal protection equipment (safety
shoes, gloves, glasses, overalls, etc.),
tools, utensils and suitable ancillary
means.
WARNING!
Never operate the machine by removing,
modifying or tampering with the guards
and protection or safety devices.
IMPORTANT!
Before carrying out any operation on the
machine, always consult the manual
which gives the correct procedures and
contains important information on
safety.