+ , '!#! '
))%
On the Camera Setup tab, you can specify the names of cameras, the sensor to be triggered for each camera, and the cameras
thatare to record if motion is detected. If the camera is a Pan/Tilt/Zoom (PTZ), you can also specify the type of camera.
Figure 6. Camera Setup
-". '
Tocreate or modify your camera settings, follow these steps:
1. SelectEnable on the camera that you wish to be enabled.
Thisfeature is NOT available on ELMO DVR Remote.
2. Entera descriptive Name for each camera. The name has to have the following format: Camera ID-Name.
3. Enterthe Sensor number(s) that will trigger the camera to record if it is set in Sensor Record mode and the sensor is activated.
4. Enterthe camera number(s) that will record when motion occurs.
5. SelectP/T/Z if the camera supports the PAN/TILT/ZOOM feature.
Thisfeature is NOT available on ELMO DVR Remote.
6. Selectthe Type of camera if the camera supports the P/T/Z feature.
RelatedTopics: Sensor Setup | Control Setup | External Monitor | Motion Detection
' % .
10 - ELMO USER MANUAL 2003G