Search Searches for previous events that have been recorded remotely, onto your
localhard drive, or to CD-R/CD-RW.
Setup Loads the setup page to configure your ELMO DVR Remote features and
functions.
Connections Manageslists of remote servers you can connect to and manage.
Disconnect Breaksthe connection from a connected server.
Multi-Site Allows a user to specify which cameras will be in each division, allowing
camerasfrom different servers to be on the same screen. This is accomplished
throughdrag and drop.
RECEIVE Displaysthe progress of data transmission.
IPAddress Displays the IP address of the currently active server.
EmergencyMonitor Handlesany sensor or controller motion events.
HealthMonitor When connected to a DVR through this application, you can view the current
statusof cameras (if there is video loss), control, and sensors.
Intelli-Upgrader Allows you to upgrade the software on the DVR if it appears in the server list
createdwith the remote software.
K-RemoteBackup Server Handles backup processes, and gives the option of cancelling any backup
process.This MUST be running in order to perform remote backups.
2-WayAudio Allowsthe remote user to communicate via voice with anyone who may be at
theserver side.
Table 3. ELMO DVR Remote Main Screen Features
" ')))%
Before you can connect to a server you must create a connection with the connections list. You can manage a server located
anywhere as long as you have internet access to that server.The server also should have a static IP Address or a Dynamic IP
domainservice such as www.123ip.com.
* ) .
Tocreate a new server, follow these steps:
1. Clickthe Connections button on the main screen. The following window appears:
58 - ELMO USER MANUAL 2003G