Elmo user manual '

NOTE:This feature is NOT available on ELMO DVR Remote.
RelatedTopics: Camera Setup | Control Setup | External Monitor
 '
))%
Controlsettings are applicable only if controls are available and are being used.
Figure 8. Control Setup
ActiveTime
Activetime refers to the designated time when the control is active (default is continuous 00:00-00:00). If the sensor is triggered
outsidethe specified time, it will be ignored.
DwellTime
DwellTime refers to the amount of time the control will remain active when it has been triggered.
  ".  ' 
Tocreate or modify control settings, follow these steps:
1. ClickEnable on the desired control.
2. Enterthe Name of the selected control.
3. Setthe Active Time for the control if required.
4. Enterthe Sensor which activates the selected control. If more than one sensor will activate the control, use commas to separate
thesensor numbers.
5. Enterthe Dwell time for the control.
12 - ELMO USER MANUAL 2003G