Figure 16. Server Information
Server Information:Enter the ServerID, location, model, version, distributor,and the purchase date. It is important that you enter
the ServerID and also remember its code for remote viewing. (When you try to connect to the server from a remote location, the
system will check the server ID code and password together. If either the code or the password is incorrect, you will be
disconnectedfrom the server.)
DisplayCamera Status bar: Displays camera status bar on main screen.
DisplayControl Status bar: Displays control status bar on main screen.
DisplaySensor Status bar: Displays sensor bar on main screen.
DisplayMotion Detection Grid: Displays motion detection grid when cameras are recording in motion mode on the main screen.
Image Transfer to Floppy Disk: If you select this function, the DVR will store the data in JPEG mode. If you don't select this
function,it will save the image in BMP format.
DisableVideo on Main Screen: Will not show video on the main screen (it is hidden).
DisableServer Information: When unchecked, will not display the server information on the main screen.
DateDisplay Format: Allows you to format how time is displayed. Select the type of display you want.
Sensor and Control Type:Select '8 SENSOR' to use eight sensors, and '16 SENSOR' to use sixteen sensors. Proper number of
sensor buttons will be displayed in the Surveillance mode when you chose 'Sensor Type'. Youwill be able to see the proper
numberof buttons in 'Hardware Setup' and 'Communication Setup'.
Tooltips:Tooltipsare shown automatically in search mode.
ExportSetting: Export settings to folder to be used in the future.
ImportSetting: Import settings previously exported from this Setup page.
Settingthe System Clock: Adjust server for Daylight Savings Time.
*' 21