matchwith your Server ID on the server software.
AddGroup Enablesthe user to add a Group.
ServerName Adescriptive name of your choice.
IPaddress IP address of the remote server.
Connect When System
Start Check this box to automatically connect to the server when the
remotesoftware loads.
Name Theuser name that is desired which corresponds to a user name
onthe server.
Password This password must match with the password on the remote
serverfor the user name you've entered above.
Cancel Allowsuser to cancel creating a new server in the list of servers
toconnect to.
Table 4. Insert to New Site Window Features
3. Clickthe Add Group button to add a Group.
4. Enterthe name of the new Group.
5. ClickOK to continue.
')))%
Before connecting to a server,ensure that the server is on, and that it is available on your local network or internet. Also, you
shoulduse the same versions of ELMO DVR Server and ELMO DVR Remote.
')
Toconnect to a server, follow these steps:
1. Clickthe Connections button on the main screen. The following window appears:
60 - ELMO USER MANUAL 2003G