Figure 19. Intelli-Zone™ Setup
' 01
ToSetup Intelli-Zone follow these steps:
1. Selectthe Intelli-Zone tab from the setup window.
2. Specifycamera on which you want to setup Intelli-Zone.
3. ClickEnable Intelli-Zone.
4. DefineP/T/Z Control Presets 1 - 10. You can also use the presets defined in the PTZ mode on the main screen.
5. Createa target zone.
6. Selectthe Start Position's preset. This is the position the camera will return to after the specified dwell time.
7. Selectthe Go to preset. The camera will move to this position when motion is detected.
8. Enterthe Dwell Time. This defines the delay time before the camera returns to the Start Position.
9. Inthe section Start Position, select the camera name.
10. Specifythe Active Time to enable Intelli-Zone on this camera.
' '' 01 25