Instruction Manual

IB-106-5081, Rev. 1.0 May 2005

Model 5081FG

pairs are recommended. Ground the trans- mitter housing to an earth ground to prevent unwanted electromagnetic interference (EMI) or radio frequency interference (RFI).

NOTE

For optimum EMI/RFI immunity, shield the 4-20 mA current loop cable and enclose in an earth grounded metal conduit.

NOTE

Never run signal or sensor wiring in the same conduit, or open tray, with power cables. Keep signal or sensor wiring at least 12 in. (0.3 m) away from other electrical equipment and 6.5 ft (2 m) from heavy electrical equipment.

It is necessary to prevent moisture from entering the Model 5081 Transmitter hous- ing. The use of weather-tight cable glands is required. If conduit is used, plug and seal connections on the transmitter housing to prevent moisture accumulation in the termi- nal side of the housing.

Moisture accumulation in the transmit- ter housing can affect its performance and may void its warranty.

b.Oxygen Probe Signal Connections

1.Two signals represent the O2 value and the cell temperature. The probe pro- vides these values to the Model 5081 Transmitter for processing and signal conditioning.

2.Wiring connections for the probe are shown in Figure 2-9.

c.Model 5081 Transmitter 4-20 mA and Signal Connections

1.A 4-20 mA signal represents the O2 value. Superimposed on the 4-20 mA

signal is HART information that is ac- cessible through a Model 275/375 Handheld Communicator or AMS software.

2.Two signals representing the O2 value and the cell temperature are supplied to the Model 5081 Transmitter from the oxygen probe.

3.Wiring connections for the Model 5081 Transmitter are shown in Figure 2-10.

NOTE

The ground arrangement shown in Figure 2-10limits the amount of noise introduced into the electronics.

4.Connect wire shields to terminal 1. Connect earth ground as shown.

TERMINAL

BLOCK

 

 

 

 

 

 

 

CONDUIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

+(GY)

-(RD)

 

 

 

 

THERMOCOUPLE

THERMOCOUPLE

 

 

 

 

CELL-(WH)

CELL+(BK)

 

 

 

 

 

 

26020004

Figure 2-9. Oxygen Probe Terminal Block

2-10 Installation

Rosemount Analytical Inc. A Division of Emerson Process Management

Page 40
Image 40
Emerson 5081FG Model 5081 Transmitter 4-20 mA and Signal Connections, Terminal Block Conduit, Thermocouple CELL-WH CELL+BK

5081FG specifications

The Emerson 5081FG Series is a cutting-edge digital smart transmitter designed for various industrial applications, including oil and gas, chemical processing, and water treatment. Known for its accuracy and reliability, the Emerson 5081FG integrates an array of advanced technologies to enhance measurement capabilities and operational efficiency.

One of the main features of the 5081FG is its multi-variable measurement, which allows for the integration of differential pressure, static pressure, and temperature readings into a single device. This capability significantly reduces the need for multiple instruments, leading to lower installation costs and improved data collection efficiency.

With Smart Wireless technology, the Emerson 5081FG offers robust wireless communication, making it ideal for remote or hard-to-reach locations. Its ability to transmit real-time data wirelessly enhances operational awareness and enables proactive maintenance decisions. The transmitter can easily connect to various process control systems for seamless integration and data sharing.

The 5081FG also incorporates Emerson's advanced diagnostics and predictive maintenance algorithms. These features continuously monitor the health of the transmitter and the processes it measures, alerting operators to potential issues before they escalate into serious problems. This proactive approach to maintenance not only improves safety but also minimizes downtime and maximizes productivity.

Another significant characteristic of the Emerson 5081FG is its rugged design, built to withstand harsh industrial environments. With an IP67 rating, it is resistant to dust and water ingress, ensuring reliable operation even in challenging conditions. The device is also designed to handle a wide range of temperatures and pressures, making it versatile for diverse applications.

User-friendly configuration and programming are facilitated by Emerson's intuitive software tools, which provide easy setup and calibration processes. This simplicity allows operators to optimize performance without needing extensive training or support.

In conclusion, the Emerson 5081FG is a powerful and reliable smart transmitter that addresses the needs of various industries. Its multi-variable measurement capability, wireless communication, advanced diagnostics, and rugged design make it an excellent choice for companies looking to enhance their operational efficiency and maintain high standards of safety and reliability. With the Emerson 5081FG, businesses can expect not only accurate measurements but also valuable insights that contribute to smarter decision-making.