Emerson 5081FG instruction manual Handling the Analyzer System Considerations

Model 5081FG

Instruction Manual

IB-106-5081, Rev. 1.0

May 2005

1

HART

MODEL 275/375

HAND HELD

INTERFACE

TWO-WIRE IN SITU

O2

mV

4-20 mA OUTPUT

SIGNAL

(TWISTED PAIR)

OXYGEN ANALYZER

MODEL 5081

TRANSMITTER

+

CALIBRATION CHECK

GAS LINE

24 VDC

REFERENCE

TEMPERATURE

POWER

AIR LINE

TERMINATION IN

SUPPLY

mV SIGNAL

INTRINSIC

CONTROL ROOM

ASSET MANAGEMENT

SAFETY

BARRIER

SOLUTIONS

(OPTIONAL)

37240002

Figure 1-2. Two-Wire In Situ Oxygen Analyzer HART Connections and AMS Application

e. Handling the Analyzer

f.

System Considerations

The probe was specially packaged to pre- vent breakage due to handling. Do not re- move the padding material from the probe until immediately before installation.

It is important that printed circuit boards and integrated circuits are handled only when adequate antistatic precautions have been taken to pre- vent possible equipment damage.

The oxygen probe is designed for in- dustrial applications. Treat with care to avoid physical damage. The probe contains components made from ce- ramic, which are susceptible to shock when mishandled. THE WARRANTY DOES NOT COVER DAMAGE FROM MISHANDLING.

Prior to installing your Rosemount Analytical Two-Wire In Situ Oxygen Analyzer, make sure you have all the components neces- sary to make the system installation. Ensure all the components are properly integrated to make the system functional.

After verifying that you have all the compo- nents, select mounting locations and deter- mine how each component will be placed in terms of available line voltage, ambient temperatures, environmental considera- tions, convenience, and serviceability. Fig- ure 1-2 shows a typical system wiring. A typical system installation is illustrated in Figure 1-3.

Rosemount Analytical Inc. A Division of Emerson Process Management Description and Specifications 1-5