Emerson 5081FG instruction manual Operation, Overview, Display, Menu Tree, Circuit END Terminal

Model 5081FG

Instruction Manual

IB-106-5081, Rev. 1.0 May 2005

3-4 OPERATION

a.Overview

This section explains the operator controls and displays of the Two-Wire In Situ Oxy- gen Analyzer. The use of the Infrared Re- mote Control (IRC) and the Model 5081 Transmitter Liquid Crystal Display (LCD) are described in detail. HART/AMS operation is not covered here but is discussed in Section 4, HART/AMS.

b.Display

The Model 5081 Transmitter LCD displays the O2 concentration, cell temperature, and

4-20 mA output current during normal op- eration (see Figure 3-4). The LCD will also display fault conditions when they occur. To interact with the transmitter, use the IRC and navigate through a series of menus displayed on the LCD.

c. Menu Tree

The screens that can be displayed are

shown in the menu tree of Figure 3-5.3 These screens are displayed on the LCD

and are accessed using the IRC keypad.

CIRCUIT

END

TERMINAL

END

MODEL 5081 TRANSMITTER

ELECTRONICS HOUSING

%

mA

37240004

Figure 3-4. Normal Operation Display

Rosemount Analytical Inc. A Division of Emerson Process Management Startup and Operation 3-3