Emerson CF160 owner manual Position the adapter/light fitter assem

BP7358 RUSTICO CF160 9/19/07 11:23 AM Page 11

8. Connect the white wire from the light fitter to the white wire from the motor (Figure 16). Connect the black wire from the light fitter to the black wire from the motor. Make sure connectors are fully engaged.

LIGHT FITTER

ADAPTER

WHITE

WIRE

ADAPTER PLATE

BLACK

WIRE

10. Screw in three 60-watt (maximum) candelabra base bulbs into the light fitter sockets (Figure 18). Remove and retain the nut and rubber washer from the light fitter threaded nipple. Place the lower glass over the threaded nipple and secure in place using the rubber washer and nut. Place the decorative cap over the threaded nipple, then screw on the finial nut and securely tighten.

60-WATTCANDELABRA BASE BULB (3)

LIGHT FITTER SOCKET

Figure 16		THREADED
9. Position the adapter/light fitter assem-		NIPPLE
bly over the adapter plate and secure	LOWER GLASS	RUBBER WASHER
using three 8-32 x 12mm pan head		NUT
screws (Figure 17).
		DECORATIVE
8-32 x 12mm PAN HEAD	Figure 18	CAP
SCREW (3)		FINIAL NUT
	11. Your ceiling fan is now installed and
	wired to be controlled by your remote
	control system.
ADAPTER/
LIGHT FITTE
ASSEMBLY

Figure 17

11 U.L. Model No.: CF160