Emerson PMT1, PME1 user manual Here is a line-by-line explanation of the example file

Monitor: Remote Host Commands

01is the record type. FFis the checksum.

This is the end-of-file record, which must be the last record in the file. It is the same for all output files.

Example: Complete Hex-Intel File

=>:080000002082E446A80A6CCE40

:020000020001FB

:08000000D0ED0A2744617EFFE8

:0400000300010002F6

:04003000902BB4FD60

:00000001FF

Here is a line-by-line explanation of the example file:

=>:080000002082E446A80A6CCE40

loads byte 2016 to address 0016 loads byte 8216 to address 0116 loads byte E416 to address 0216 loads byte 4616 to address 0316 loads byte A816 to address 0416 loads byte 0A16 to address 0516 loads byte 6C16 to address 0616 loads byte CE16 to address 0716

=>:020000020001FB

sets the segment value to one, so 1016 must be added to all subsequent load addresses.

=>:08000000D0ED0A2744617EFFE8

loads byte D016 to address 1016 loads byte ED16 to address 1116 loads byte 0A16 to address 1216 loads byte 2716 to address 1316 loads byte 4416 to address 1416 loads byte 6116 to address 1516 loads byte 7E16 to address 1616 loads byte FF16 to address 1716

=>:0400000300010002F6

10002367-02 PmT1 and PmE1 User’s Manual

8-23