EMI T2HB, T4HB, T3HB, S2HB manual Low Volt Connection, Completed Electrical Connections

S2HB Electrical Wiring Installation Section

Inside electrical access panel.

Note: Refer to the units’ wiring diagram for all wiring.

Wire Diagram Low Volt High Volt

8. Check wiring diagram for the re-	plastic edge guards
quired number of low voltage wires
to be run between indoor and out-

door sections.	9. Connect the 24 volt wiring matching color
Low Volt Connection	to color. Refer to the wiring diagram on the
	inside panel of the condenser, and also
	refer to the wiring diagram on the indoor
	unit. Low volt interconnect should be at
	least 18 awg.

10.To replace side panel slide the slotted holes of the panel onto the loosened screws of the front

panel so that the edge of the front panel covers the edge of the side panel.

Completed

Electrical Connections

11. Tighten all remaining loose screws.

Multi-zone Heat Pump Condensing Units 6 www.enviromaster.com