LAN Settings – Static IP

￿Click on the LAN Interface link on the navigation drop-down menu. This feature allows you to configure the LAN interface using a static IP address or as a DHCP server/client. This IP address is also used to access the web-based interface.

￿IP Address: Enter an IP address for this device.

￿Subnet Mask: Enter the subnet mask for this IP address.

￿Default Gateway: Enter the IP address of the default gateway.

￿DHCP: Since you have specified a static IP address, select Disabled from the drop- down list.

￿802.1d: You may enable this option if you would like to use the spanning tree feature for bridging. (optional)

￿Clone MAC Address: Specify a MAC address if you would like to use a different MAC address on this device. (optional)

￿Click on the Apply Changes to save the changes.

Note: If you change the IP address here, you may need to adjust your PC’s network settings to access the network again.

20

Page 20
Image 20
EnGenius Technologies 1.2 user manual LAN Settings Static IP