EnGenius Technologies 1.2 user manual WAN Settings Dhcp Client

￿Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of PPTP packets on a VPN connection.

￿Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of L2TP packets on a VPN connection.

￿Click on the Apply Changesto save the changes.

WAN Settings – DHCP Client

￿Click on the WAN link on the navigation drop-down menu. This feature allows you to configure the WAN interface using a static IP address, DHCP Client, PPoE, or PPTP. The DHCP Client feature allows the ISP to provide an IP address to the device. This is also known as Dynamic IP.

￿WAN Access Type: Select DHCP Client from the drop-down list. This type of connection is usually used when the ISP will supply the IP address and DNS settings. This is also known as Dynamic IP.

￿Host Name: Specify a host name for this device.

￿DNS: The ISP usually automatically assigns the DNS IP address, in case you need to assign it manually then click on the Set DNS Manually and fill in the fields.

￿MTU: You may adjust the Maximum Transmit Unit (MTU), however it is recommend

that this value is set to the default: 1500 bytes

￿DNS 1-3:Specify the IP address of the DNS server

￿Clone MAC Address: Specify a MAC address if you would like to use a different MAC address on this device. (optional)

24