WAN Access Type: Select PPTP from the
IP Address: Enter an IP address for this device, which is assigned by your ISP.
Subnet Mask: Enter the subnet mask for this IP address, which is assigned by your ISP.
Default Gateway: Enter the IP address of the default gateway, which is assigned by your ISP.
MTU: You may adjust the Maximum Transmit Unit (MTU), however it is recommend
that this value is set to the default: 1500 bytes
DNS
Clone MAC Address: Specify a MAC address if you would like to use a different MAC address on this device. (optional)
Enable uPNP: Place a check in this box to enable UPnP. It is recommended to enable this feature as it’s used by several applications.
Enable PING Access on WAN: Place a check in this box if you would like the device to be pinged from the WAN side (ISP).
Enable Web Sever Access on WAN: Place a check in this box if the static IP address if used for a
Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of IPsec packets on a VPN connection.
Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of PPTP packets on a VPN connection.
Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of L2TP packets on a VPN connection.
Click on the Apply Changesto save the changes.
27
