EnGenius Technologies 1.2 user manual IP Filtering

￿You may place a check in the box on under the Select column and then click on Delete Selected to remove the selected entry. You may also click on Delete All to delete all the filtering entries.

IP Filtering

￿Select IP Filtering from the drop-down list. This feature is used to restrict certain IP address from using certain protocols over the Internet. These filters can be used for securing and restricting your network.

￿Enable IP Filtering: Place a check in this box to enable this feature.

￿Local IP Address: Enter the IP address of the device on the local network.

￿Protocol: Select a protocol from the drop-down list: TCP, UDP, or Both.

￿Comment: You may add a comment to define the filter. (optional)

￿Click on the Apply Changes button to add the filter to the table.

￿You may place a check in the box on under the Select column and then click on Delete Selected to remove the selected entry. You may also click on Delete All to delete all the filtering entries.

40