EnGenius Technologies 1.2 user manual WAN Settings Static IP

WAN Settings – Static IP

￿Click on the WAN link on the navigation drop-down menu. This feature allows you to configure the WAN interface using a static IP address, DHCP Client, PPoE, or PPTP.

￿WAN Access Type: Select Static IP from the drop-down list. This type of connection is used when your ISP has provided you a dedicated IP address.

￿IP Address: Enter an IP address for this device, which is assigned by your ISP.

￿Subnet Mask: Enter the subnet mask for this IP address, which is assigned by your ISP.

￿Default Gateway: Enter the IP address of the default gateway, which is assigned by your ISP.

￿MTU: You may adjust the Maximum Transmit Unit (MTU), however it is recommend

that this value is set to the default: 1500 bytes

￿DNS 1-3:Specify the IP address of the DNS server

￿Clone MAC Address: Specify a MAC address if you would like to use a different MAC address on this device. (optional)

￿Enable uPNP: Place a check in this box to enable UPnP. It is recommended to enable this feature as it’s used by several applications.

￿Enable PING Access on WAN: Place a check in this box if you would like the device to be pinged from the WAN side (ISP).

￿Enable Web Sever Access on WAN: Place a check in this box if the static IP address if used for a web-server.

￿Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of IPsec packets on a VPN connection.

23