EnGenius Technologies 1.2 user manual WAN Settings Pptp

￿Connection Type: Select Continuous (always online), Connect on Demand (connect to the ISP only when you click on a website), or Manual (connect to the ISP only when you click on a ‘Connect’ button) from the drop-down list.

￿Idle Time: The PPPoE service can automatically disconnect if the connection is idle. Specify the number of minutes after between 1 and 100.

￿DNS: The ISP usually automatically assigns the DNS IP address, in case you need to assign it manually then click on the Set DNS Manually and fill in the fields.

￿MTU: You may adjust the Maximum Transmit Unit (MTU), however it is recommend

that this value is set to the default: 1500 bytes

￿DNS 1-3:Specify the IP address of the DNS server

￿Clone MAC Address: Specify a MAC address if you would like to use a different MAC address on this device. (optional)

￿Enable uPNP: Place a check in this box to enable UPnP. It is recommended to enable this feature as it’s used by several applications.

￿Enable PING Access on WAN: Place a check in this box if you would like the device to be pinged from the WAN side (ISP).

￿Enable Web Sever Access on WAN: Place a check in this box if the static IP address if used for a web-server.

￿Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of IPsec packets on a VPN connection.

￿Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of PPTP packets on a VPN connection.

￿Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of L2TP packets on a VPN connection.

￿Click on the Apply Changesto save the changes.

WAN Settings – PPTP

￿Click on the WAN link on the navigation drop-down menu. This feature allows you to configure the WAN interface using a static IP address, DHCP Client, PPoE, or PPTP.

26