EnGenius Technologies 1.2 user manual WAN Settings PPPoE

￿Enable uPNP: Place a check in this box to enable UPnP. It is recommended to enable this feature as it’s used by several applications.

￿Enable PING Access on WAN: Place a check in this box if you would like the device to be pinged from the WAN side (ISP).

￿Enable Web Sever Access on WAN: Place a check in this box if the static IP address if used for a web-server.

￿Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of IPsec packets on a VPN connection.

￿Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of PPTP packets on a VPN connection.

￿Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of L2TP packets on a VPN connection.

￿Click on the Apply Changesto save the changes.

WAN Settings – PPPoE

￿Click on the WAN link on the navigation drop-down menu. This feature allows you to configure the WAN interface using a static IP address, DHCP Client, PPoE, or PPTP. A PPPoE service requires a user name and password to log into the Internet and is usually a DSL service.

￿WAN Access Type: Select PPPoE from the drop-down list. This type of connection is usually used for a DSL service and requires a username and password to connect.

￿User Name: Specify the user name which is provided by your ISP.

￿Password: Specify the password which is provided by your ISP.

￿Service Name: Specify the name of the ISP.

25