Control Board

The Control Board (Part # CU-CB05) is a digital read-out board. This board offers a wide variety of settings to operate the unit. This part can be removed from the unit by loosening the two outside screws and pulling the board back to the inside of the stove. The rear access panel should be removed prior to removing the control board. A 6-amp “quick-blow” fuse is used on this Control Board.

NOTE: The bottom three control buttons are preset at the factory and should not require any changes. See “Operating Instructions” and “Daily Operation” section of the manual for instructions on other Control Board settings.

 

Recommended Heat Ranges:

 

Low Burn:

Heat Range setting:

1

 

Room Air Blower setting:

1

Medium Low:

Heat Range setting: 2

– 3

Room Air Blower setting: *

Medium High:

Heat Range setting:

4

– 8

Room Air Blower setting: *

High Burn:

Heat Range setting:

9

 

Room Air Blower setting:

9

* NOTE: Blower Speed will automatically be adjusted to the desired Heat Range that you select.

CAUTION:

NOTE: The bottom

3buttons are pre-set at the factory and do not need adjustment.

Call Customer Service at (800) 245-6489 if you have questions or problems.

Illustration 4

Control Board Diagram

CAUTION: Moving Parts May Cause Injury.

Do NOT Operate with Panel(s) Off.

DANGER: Parts May Be Hot. Risk of Electric Shock.

Disconnect Power Before Servicing Unit.

20

Page 20
Image 20
England's Stove Works 49-TRC22, 10-CDV, 49-SHC22 operation manual Control Board, Recommended Heat Ranges